Brembo "HP Billet" REAR Brake Caliper 

120.A441.XX

Also requires (1) Fine Threaded Banjo Bolt

Most Likely your current REAR brake lines have Course Threaded (10x1.25) Banjo Bolts. You will need ONE of these Fine Threaded (10x1.0) Banjo Bolts to replace your current one
Note. We do NOT sell these FINE THREADED BANJO BOLT separately. So be sure to Add


PLEASE NOTE, this Kit REAR CALIPER DOES REQUIRE The Customer to purchase a Different REAR BRAKE LINE, that is LONGER then the Stock Rear Line, Since the Caliper will NOW be mtn. BELOW the AXLE instead of On Top.
ONLY the customer can determine HOW Long this line needs to be once they decide how they are going to route the Brake line to the Rear caliper. Either Right side of the Swingarm, or Left Side, or around the back.
Please Call GALFER USA for Custom Length Rear Lines -
(800) 685-6633

Brembo 34mm Cast Alum. REAR Brake Caliper - BLACK

20.6951.12

Requires (1) Fine Threaded Banjo Bolt
and
Brembo Billet Caliper Bracket

Most Likely your current REAR brake lines have Course Threaded (10x1.25) Banjo Bolts. You will need ONE of these Fine Threaded (10x1.0) Banjo Bolts to replace your current one
Note. We do NOT sell these FINE THREADED BANJO BOLT separately. So be sure to Add


PLEASE NOTE, this Kit REAR CALIPER DOES REQUIRE The Customer to purchase a Different REAR BRAKE LINE, that is LONGER then the Stock Rear Line, Since the Caliper will NOW be mtn. BELOW the AXLE instead of On Top.
ONLY the customer can determine HOW Long this line needs to be once they decide how they are going to route the Brake line to the Rear caliper. Either Right side of the Swingarm, or Left Side, or around the back.
Please Call GALFER USA for Custom Length Rear Lines -
(800) 685-6633

Brembo 34mm REAR Brake Caliper 34G

20.6951.xx

Requires Custom Length Rear Brake Line.
Your Stock Brake line will NOT work.

- Requires caliper relocation bracket
- Requires (1) Fine Threaded Banjo Bolt, stock bolt will NOT work

Note. We do NOT sell the FINE THREADED BANJO BOLT separately. So be sure to Add

20.6951.12 Brembo 34mm brake caliper GROM 20.B852.41 20.B852.20 20.B852.30 20.B852.52 20.B852.80

Brembo Cast Supersport REAR Brake Caliper

120.B278.10

Also requires (1) Fine Threaded Banjo Bolt

Most Likely your current REAR brake lines have Course Threaded (10x1.25) Banjo Bolts. You will need ONE of these Fine Threaded (10x1.0) Banjo Bolts to replace your current one
Note. We do NOT sell these FINE THREADED BANJO BOLT separately. So be sure to Add


PLEASE NOTE, this Kit REAR CALIPER DOES REQUIRE The Customer to purchase a Different REAR BRAKE LINE, that is LONGER then the Stock Rear Line, Since the Caliper will NOW be mtn. BELOW the AXLE instead of On Top.
ONLY the customer can determine HOW Long this line needs to be once they decide how they are going to route the Brake line to the Rear caliper. Either Right side of the Swingarm, or Left Side, or around the back.
Please Call GALFER USA for Custom Length Rear Lines -
(800) 685-6633