Dyno Jet Wide Band 2 - for use with PCV (15-7023x)

Highly recommend for use with :
'13-'20  GROM      with  PCV
'19-'21  Monkey    with  PCV
'14-'22  KTM 390   with  PCV

IN STOCK

Requires PCV unit

Custom Setup by Hard Racing to utilize Low Voltage output for o2 Sensor Signal

Output for Optional A/F Digital Gauge

Kit Includes: Wide Band 2 Control Module
- 18mm x 1.5mm Sensor Boss and Plug
- Bosch 5 wire LSU4.2 Wide Band Sensor with harness
- CAN-Link to CAN-Link Cable
- Installation Instructions

Please note, Grom SF Models require TRIGGER RELAY for Proper installation.

'13-'20 GROM & SF Models

Controls Fuel & Ignition & Rev. Limit

16-049

IN STOCK

Please Note,
Dyno Jet says, this PCV does NOT allow adjustment of the closed loop area on this model.

Watch this video for more details :

DynoJet Digital Air/Fuel Gauge - Black Face(15-7021)

CAN ONLY BE USED WITH WBC2

IN STOCK

DYNO JET POD-300 Digital Display
(ONLY FOR PCV, AutoTune, Wideband 2 & CMD) (POD-300)

Requires a PCV or WBC2

- Real time fuel adjustments
- Display channels real-time
- Weather resistant for use in all conditions
- High contrast display, viewable in direct sunlight

IN STOCK

Product info

Watch our youtube  video for more details :
DynoJet Power Vision   PV3   
P.N.  PV3-16-01
PV3-16-01  For Honda Grom 2014-20

DEVICE FEATURES:
-Flash ECU via vehicle diagnostic connector, no need to open or remove ECU from the vehicle
-Read original tune via diagnostic connector – allows you to restore ECU at anytime
-Display and/or log vehicle data channels in real-time
-“Hindsight” feature captures the last 2 minutes of data with the touch of a button
-Weather resistant for use in all conditions

PERFORMANCE TUNE FEATURES:
-Support for popular aftermarket performance parts
-Fueling revised for maximum power and torque
-Spark timing optimized for pump or race gas
-Rev & speed limits raised
-Torque limiting functions reduced or eliminated
-Revised drive-by-wire throttle profiles

Dyno Jet Wide Band CX - WBCX SINGLE CHANNEL AFR KIT FOR HONDA (WB-PV16-1)

( FOR USE WITH PV3 )

The Wideband CX Kit takes all of the guesswork out of optimization and gives you pure, reliable power for your Honda motorcycle. It plugs directly into the diagnostics port for an easy installation and includes a wideband sensor for the exhaust. Our O2 sensor features real-time monitoring that is stored directly into your Power Vision to be reviewed using Dynojet’s Power Core Software Suite for easy changes and updates.

It  is a plug-and-play kit with no extra wires or cabling like other sensors on the market. Maximize your Honda motorcycle’s power and take control of your air/fuel ratio with the Wideband CX, perfectly paired with our best-selling Power Vision.

Specs:
Integrates AFR data from the O2 sensor with the OEM databus
Ensures real-time O2 AFR accuracy and avoids single offset issues

DynoJet Power Vision   PV3   

P.N.  PV3-16-18

PV3-16-18 For Honda  2022-23  Grom RR

DEVICE FEATURES:
-Flash ECU via vehicle diagnostic connector, no need to open or remove ECU from the vehicle
-Read original tune via diagnostic connector – allows you to restore ECU at anytime
-Display and/or log vehicle data channels in real-time
-“Hindsight” feature captures the last 2 minutes of data with the touch of a button
-Weather resistant for use in all conditions

PERFORMANCE TUNE FEATURES:
-Support for popular aftermarket performance parts
-Fueling revised for maximum power and torque
-Spark timing optimized for pump or race gas
-Rev & speed limits raised
-Torque limiting functions reduced or eliminated
-Revised drive-by-wire throttle profiles

'22+  GROM RR  Models

 
16-088

 

Honda Power Commander, Grom , Model PC6, Year 2014-20

Part#PC6-16049

Features:

-Compact design for discrete placement & easy uninstallation to revert to stock settings

- Easily change & upgrade tunes as you upgrade parts

- Comes with Power Core software that connects dyno runs with our EFI Tuning Devices to unlock

your ride’s potential

- Pair with other Power Commander accessories like the Autotune, Quickshifter or POD-300

- Analog input allows you to install any 0-5 volt sensor and build an adjustment table based on its

input such as boost or temperature

- Easily connects to your computer via USB

- Each cylinder can be mapped individually and for each gear, giving riders more granular control

- Proudly made in the USA

DynoJet Power Vision 3 LICENSE ONLY

DJ-PV3-L

This is for an Additional License for the Power Vision 3, to be used on Additional Bike.

License ONLY

1 License required per bike 

.

 Honda Power Commander, Grom RR, Model PC6, Year 2022-23

Part#PC6-16088

Features:

-Compact design for discrete placement & easy uninstallation to revert to stock settings

- Easily change & upgrade tunes as you upgrade parts

- Comes with Power Core software that connects dyno runs with our EFI Tuning Devices to unlock

your ride’s potential

- Pair with other Power Commander accessories like the Autotune, Quickshifter or POD-300

- Analog input allows you to install any 0-5 volt sensor and build an adjustment table based on its

input such as boost or temperature

- Easily connects to your computer via USB

- Each cylinder can be mapped individually and for each gear, giving riders more granular control

- Proudly made in the USA